User's Manual

Chapter 4

Configure the Router in Standard Wireless Router Mode

• IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

• Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your

ISP. Normally 255.255.255.0 is used as the subnet mask..

• Default Gateway - Enter the gateway IP address in dotted-decimal notation provided

by your ISP.

• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet

networks is 1500 Bytes. It is not recommended that you change the default MTU size

unless required by your ISP.

• Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-

decimal notation provided by your ISP.

PPPoE/Russia PPPoE

If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE.

• User Name/Password - Enter the user name and password provided by your ISP. These

fields are case-sensitive.

• Confirm Password - Enter the Password provided by your ISP again to ensure the

password you entered is correct.