User's Manual
91
Chapter 6
Congure the Router in Repeater Mode
• Wireless Name of Root AP - The SSID of the root router.
• Channel - The current wireless channel in use.
• Mode - The current wireless working mode in use.
• Channel Width - The current wireless channel width in use.
• MAC Address - The physical address of the router.
• Traffic Statistics - The router’s traffic statistics.
• Received (Bytes) - Traffic in bytes received from the WAN port.
• Received (Packets) - Traffic in packets received from the WAN port.
• Sent (Bytes) - Traffic in bytes sent out from the WAN port.
• Sent (Packets) - Traffic in packets sent out from the WAN port.
• System Up Time - The length of the time since the router was last powered on or reset.
Click Refresh to get the latest status and settings of the router.
6. 2. Working Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Working Mode.
3. Select the working mode as needed and click Save.
6. 3. Network
6. 3. 1. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.