User's Manual

TL-WR841HP
300Mbps High Power Router User Guide
- 13 -
 If you are visiting the Router from another computer, rather than the main computer,
please select No, and then enter the main computer’s MAC in the field WAN MAC
Address.
Figure 3-9 Quick Setup – MAC Clone
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-10.
Figure 3-10 Quick Setup - Static IP
 IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
 Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
 Default Gateway - Enter the gateway IP address into the box if required.
 Primary DNS - Enter the DNS Server IP address into the box if required.
 Secondary DNS - If your ISP provides another DNS server, enter it into this field.
4. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11.