User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Internet
- Chapter 3. Configuration for Router Mode
- 3.1 Login
- 3.2 Quick Setup
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Status
- 3.4.2 Network
- 3.4.3 Wireless
- 3.4.4 Wireless Statistics
- 3.4.5 Guest Network
- 3.4.6 DHCP
- 3.4.7 Forwarding
- 3.4.8 Security
- 3.4.9 Parental Control
- 3.4.10 Access Control
- 3.4.11 Advanced Routing
- 3.4.12 Bandwidth Control
- 3.4.13 IP & MAC Binding
- 3.4.14 ARP List
- 3.4.15 Dynamic DNS
- 3.4.16 No-IP DDNS
- 3.4.17 IPv6 Support
- 3.4.18 System Tools
- 3.4.19 Diagnostic
- 3.4.20 Firmware Upgrade
- Chapter 4. Range Extender Mode
- Chapter 5. Access Point Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-122-
TL-WR841HP
300Mbps High Power Wireless N Router
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
4.3.5 System Tools
Go to “System Tools”, and then you can see the submenus under the main menu: LED
Control, Time settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup &
Restore, Reboot, Password and System Log. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
4.3.5.1. LED Control
Go to “Setting→System Tools→LED Control”, and then you can turn On or Off the LEDs on
your router according to a specific time schedule.
Figure 4-18 LED Control
Night Mode - Indicates whether the Night Mode is On (enabled) or Off (disabled).
LED Off Time - Select the time schedule to turn off LEDs.
4.3.5.2. Time Settings
Go to “Setting→System Tools→Time Settings”, and then you can configure the time.