User's Manual

-42-
TL-WR841HP
300Mbps High Power Wireless N Router
in the specified length. ASCII format stands for any combination of keyboard
characters in the specified length.
 WEP Key - Select which of the four keys will be used and enter the matching WEP key
that you create. Make sure these values are identical on all wireless stations in your
network.
 Key Type - You can select the WEP key length for encryption. "Disabled" means this
WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero
key is not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero
key is not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, and
null key is not permitted) or 16 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.
3.4.3.4. Wireless MAC Filtering
Go to “Advanced→Wireless→Wireless MAC Filtering”, you can control the wireless access
by configuring the Wireless MAC Filtering function.
Figure 3-26 Wireless MAC Filtering
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
 MAC Address - The wireless station's MAC address that you want to filter.