User's Manual

-44-
TL-WR841HP
300Mbps High Power Wireless N Router
2. Select the radio button “Allow the stations specified by any enabled entries in the list
to access” for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the Add New... button.
1) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address
field.
2) Enter wireless station A/B in the Description field.
3) Select Enabled in the Status drop-down list.
4) Click the Save button.
The filtering rules that configured should be similar to the following list:
3.4.3.5. Wireless Advanced
Go to “Advanced→Wireless→Wireless Advanced”, you can configure the advanced settings
of your wireless network.
Figure 3-28 Wireless Advanced
 Transmit Power - Here you can specify the transmit power of this device. You can select
100%, 75% or 50% which you would like.
 Beacon Interval - Enter a value between 40-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network.