User's Manual

-47-
TL-WR841HP
300Mbps High Power Wireless N Router
 Allow Guest To Access My Local Network - If enabled, guests can communicate with
hosts.
 Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth
Control rules will take effect.
 Egress Bandwidth For Guest Network - The upload speed through the WAN port for
Guest Network.
 Ingress Bandwidth For Guest Network - The download speed through the WAN port for
Guest Network.
 Enable Guest Network – If enabled, the Guest Network function will take effect.
 Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Wireless Security - You can choose the security type of Guest Network here.
 Version - You can choose the version of the WPA/WPA2-Personal security on the
drop-down list. The default setting is WPA2-PSK.
 Encryption - You can select Automatic (Recommended), TKIP or AES as Encryption.
The default setting is AES.

Note:
If you choose TKIP encryption, you will find a notice in red as shown below.
 Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.