User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect to the Internet
- Log In
- Configure the Router in Standard Wireless Router
- Configure the Router in Access Point Mode
- Configure the Router in Repeater Mode
- FAQ
103
Chapter 6
Conī®gure the Router in Repeater Mode
6. 6. System Tools
6. 6. 1. LED Control
The LED control feature allows you to turn off or on the LEDs of the router automatically
when needed.
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to System Tools > LED Control.
3. Tick Night Mode and select the LED Off Time from the pull-down lists. Then click
Save.
6. 6. 2. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The Router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to System Tools > Time Settings.