User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect to the Internet
- Log In
- Configure the Router in Standard Wireless Router
- Configure the Router in Access Point Mode
- Configure the Router in Repeater Mode
- FAQ
73
Chapter 5
Congure the Router in Access Point Mode
• Mode - The current wireless mode which the router works on.
• Channel - The current wireless channel.
• Channel Width - The current wireless channel width.
• MAC Address - The physical address of the router.
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
5. 2. Operation Mode
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to Operation Mode.
3. Select Access Point and click Save.
5. 3. Network
5. 3. 1. LAN
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.