User's Guide

21
Chapter 4
Congure
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
•
Connect Automatically - The connection can be re-established automatically
when it is down.
•
Time-based Connecting - The connection will only be established in the period
from the start time to the end time (both are in HH:MM format).
•
Connect Manually - You can click Connect/Disconnect to connect/disconnect
immediately. This mode also supports the
Max Idle Time function as Connect
on Demand
mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
• Only when you have configured the system time on the
System Tools > Time Settings page, will the time-based
connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
Max Idle Time because some
applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
•
Service Name/AC Name - The service name and AC (Access Concentrator) name
should not be configured unless you are sure it is necessary for your ISP. In most cases,
leaving these fields blank will work.
•
ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the
router, please select
Use IP address specified by ISP and enter the IP address provided
by your ISP in dotted-decimal notation.