User's Guide
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Configure
- FAQ
72
Chapter 4
Congure
• Packets Statistics Interval (5-60) - The default value is 10. Select a value between 5 and
60 in the drop-down list. The Packets Statistic Interval indicates the time section of
the packets statistic.
• Sorted Rules – Choose how displayed statistics are sorted.
• Select
Auto-refresh to refresh automatically. Click Refresh to refresh immediately.
• Click
Reset All to reset the values of all the entries to zero.
• Click
Delete All to delete all entries in the table.
Statistics Table
IP/MAC Address The IP and MAC address are displayed with related statistics.
Total
Packets The total number of packets received and transmitted by the router.
Bytes The total number of bytes received and transmitted by the router.
Current
Packets
The total number of packets received and transmitted in the last Packets Statistic interval
seconds.
Bytes The total number of bytes received and transmitted in the last Packets Statistic interval seconds.
ICMP Tx
The number of the ICMP packets transmitted to WAN per second at the specified Packets
Statistics interval. It is shown like “current transmitting rate / Max transmitting rate”.
UDP Tx
The number of UDP packets transmitted to the WAN per second at the specified Packets
Statistics interval. It is shown like “current transmitting rate / Max transmitting rate”.
TCP
SYN Tx
The number of TCP SYN packets transmitted to the WAN per second at the specified Packets
Statistics interval. It is shown like “current transmitting rate / Max transmitting rate”.
Modify
Reset Reset the value of the entry to zero.
Delete Delete the existing entry in the table.
4. 17. Logout
Click Logout at the bottom of the main menu, and you will log out of the web
management page and return to the login window.