User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect to the Internet
- Log In to the Router
- Configure the Router in Wireless Router Mode
- Configure the Router in Hotspot Router Mode
- Configure the Router in Access Point Mode
- Configure the Router in Range Extender Mode
- FAQ
10
Chapter 2
Connect to the Internet
2. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (wireless name) and password printed on the bottom label of the router.
3. Enter http://tplinkwifi.net in the address bar of a web browser. Use admin for both
username and password, and then click Login.
4. After successfully login, select Range Extender mode and follow the Quick Setup
to set up the internet connection.
5. Relocate: Place the router between your host router and the Wi-Fi dead zone. The
location you choose must be within the range of your existing host network.
Extended NetworkHost Network
DevicesHost Router Router
6. Enjoy! The extended network shares the same wireless password as that of your
host network, but may have different network name if you have customized it during
the configuration.
2. 2. 4. Access Point Mode
This mode transforms your existing wired network to a wireless network.
DevicesRouterWired Router
Ethernet4Ethernet3Ethernet1Ethernet2Internet
Ethernet2Internet
WAN