User's Manual

57
Chapter 4
Configure the Router in Wireless Router Mode
4. 15. IPv6
This function allows you to enable IPv6 function and set up the parameters of the
router’s Wide Area Network (WAN) and Local Area Network (LAN).
4. 15. 1. IPv6 Status
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6 Status, and you can view the current IPv6 status information of
the router.
• WAN - This section shows the current IPv6 Connection Type.
• TPv6 LAN - This section shows the current IPv6 information of the router’s LAN port,
including IPv6 Address Type, Prefix Length and IPv6 Address.
4. 15. 2. IPv6 WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6 WAN. Select Enable IPv6.