User's Manual

TL-WR841N/TL-WR841ND
300Mbps Wireless N Router
4.12.1 Rule
Choose menu “Access Control
→
Rule”, you can view and set Access Control rules in the
screen as shown in Figure 4-48.
Figure 4-48 Access Control Rule Management

Enable Internet Access Control - Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
 Rule Name - Here displays the name of the rule and this name is unique.
 Host - Here displays the host selected in the corresponding rule.
 Target - Here displays the target selected in the corresponding rule.
 Schedule - Here displays the schedule selected in the corresponding rule.
 Status - This field displays the status of the rule. Enabled means the rule will take effect,
Disabled means the rule will not take effect.
 Modify - Here you can edit or delete an existing rule.
To add a new rule, please follow the steps below.
1. Click the Add New… button and the next screen will pop-up as shown in Figure 4-49.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
3. Select a host from the Host drop-down list or choose “Click Here To Add New Host List”.
-64-