User's Manual

TL-WR843N
300Mbps Wireless AP/Client Router User Guide
- 94 -
 IPv6 Address - The IPv6 address assigned by your ISP dynamically.
 Default Gateway
- Display the default gateway in colon-hexadecimal notation provided by your
ISP.
Click the Renew button to renew the IPv6 parameters from your ISP.
Click the Release button to release the IPv6 parameters from your ISP.
If your ISP gives you one or two DNS IPv6 addresses, select Use the following IPv6 DNS Servers
and enter the Primary IPv6 DNS and Secondary IPv6 DNS into the correct fields. Otherwise, the
DNS servers will be assigned from ISP dynamically.
 Primary IPv6 DNS - Enter the DNS IPv6 address in colon-hexadecimal notation provided by
your ISP.
 Secondary IPv6 DNS - Enter another DNS IPv6 address in colon-hexadecimal notation
provided by your ISP.

Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
 Address Autoconfiguration Type – RADVD (Router Advertisement Daemon)
andDHCPv6(Dynamic Host Configuration Protocol for IPv6) Server.
DHCPv6 Server
• Release Time - the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
 Site Prefix Configuration Type - The type of IPv6 address prefix.
• Delegated - Get the IPv6 address prefix from the ISP automaticlly, and the device will
delegate it to the LAN.
• Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your ISP
to get more infomation before you configure them.
 LAN IPv6 Address - Display the LAN IPv6 address created by the device.
3) Static IPv6