User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR843N
300Mbps Wireless AP/Client Router User Guide
- 96 -
Enable IPv6 - Enable or disable the IPv6 feature.
PPPoE Session - The PPP session type for IPv6 connection. There are two types:
• Share with PPPoEv4 - The PPPoEv6 and PPPoEv4 use the same PPP session.
• Create a new Session - The PPPoEv6 and PPPoEv4 use different PPP sessiones. It is
default to select this option.
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
If your ISP gives you one or two DNS IPv6 addresses, select Use the following IPv6 DNS Servers
and enter the Primary IPv6 DNS and Secondary IPv6 DNS into the correct fields. Otherwise, the
DNS servers will be assigned from ISP dynamically.
Primary IPv6 DNS - Enter the DNS IPv6 address in colon-hexadecimal notation provided by
your ISP.
Secondary IPv6 DNS - Enter another DNS IPv6 address in colon-hexadecimal notation
provided by your ISP.