User's Manual

TL-WR843N
300Mbps Wireless AP/Client Router User Guide
- 97 -

Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
 Connection Mode - The way to connect the ISP.
• Alway On - Connect automaticlly.
• Connect Manual - Connect by the user manually.
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
 Address Autoconfiguration Type – RADVD (Router Advertisement Daemon)
andDHCPv6(Dynamic Host Configuration Protocol for IPv6) Server.
DHCPv6 Server
• Release Time - the length of time a network user will be allowed to keep connecting to the
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
 Site Prefix Configuration Type - The type of IPv6 address prefix.
• Delegated - Get the IPv6 address prefix from the ISP automaticlly, and the device will
delegate it to the LAN.
• Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your ISP
to get more infomation before you configure them.
LAN IPv6 Address - Display the LAN IPv6 address created by the device.
5) Tunnel 6to4
 Enable IPv6 - Enable or disable the IPv6 feature.