User's Manual

TL-WR843N
300Mbps Wireless AP/Client Router User Guide
- 16 -
Figure 3-13 Quick Setup – Wireless
 Wireless Radio - The wireless radio can only be enabled and disabled.
 Wireless Network Name - Enter a value of up to 32 characters. The same name of SSID
(Service Set Identification) must be assigned to all wireless devices in your network.
Considering your wireless network security, the default SSID is set to be TP-LINK_XXXX
(XXXX indicates the last unique six numbers of each Router’s MAC address). This value
is case-sensitive. For example, TEST is NOT the same as test.
 Disable Security - The wireless security function can be enabled or disabled. If disabled,
the wireless stations will be able to connect the Router without encryption. It is
recommended strongly that you choose one of following options to enable security.
 WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.
 PSK Password - You can enter ASCII or Hexadecimal characters.
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case keys
will affect the outcome. It would also be a good idea to write down the key and all
related wireless security settings.
 No Change - If you chose this option, wireless security configuration will not change!