User's Manual

TL-WR843N
300Mbps Wireless AP/Client Router User Guide
- 40 -
Figure 4-17 Wireless Settings
 Wireless Network Name (also called the SSID) - Enter a value of up to 32 characters. The
same name of SSID (Service Set Identification) must be assigned to all wireless devices in
your network. Considering your wireless network security, the default SSID is set to be TP-
LINK_XXXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
 Mode - Select the desired mode. The default setting is 11bgn mixed.
11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
It is strongly recommended that you set the Mode to 802.11b&g&n, and all of 802.11b,
802.11g, and 802.11n wireless stations can connect to the Router.
 Channel width - Select the channel width from the pull-down list. The default setting is Auto,
which can automatically adjust the channel width for your clients.

Note:
If 11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel Width
selecting field will turn grey and the value will become 20MHz, which is unable to be changed.