Specifications

TL-WR845N
300Mbps Wireless N Router
To set up a virtual server entry:
1. Click the Add New… button. (pop-up
the page of Add or Modify a Virtual Server Entry)
2. Select the service you want to use from the Common Service Port list. If the Common
Service Port list does not have the service that you want to use, type the number of the
service port or service port range in the Service Port box.
3. You can enter a specific port number, or leave it blank if the Internal Port is the same as
the Service Port.
4. Type the IP Address of the computer in the IP Address box.
5. Select the protocol used for this application, either TCP or UDP, or All.
6. Select the Enable check box to enable the virtual server.
7. Click the Save button.

Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/ Disabled All button to make all entries enabled/ disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return the previous
page.
-48-