Specifications

TL-WR845N
300Mbps Wireless N Router
4.13.1 Static Routing List
Choose menu “Advanced Routing > Static Routing List”, and then you can configure the
static route in the next screen. A static route is a pre-determined path that network information
must travel to reach a specific host or network.
To add static routing entries:
1. Click Add New… on the page of Static Routing, you will see the screen in the figure below.
2. Enter the following data:
 Destination Network - The Destination Network is the address of the network or host that
you want to assign to a static route.
 Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
 Default Gateway - This is the IP Address of the gateway device that allows for contact
between the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
-69-