User's Manual
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Set Up Internet Connection Via Quick Setup Wizard
- Configure the router
- FAQ
34
Chapter 4
6. Select Schedule from the Access Time drop-down list and customize it for the
guest network.
7. Click Save.
• Allow Guest To Access My Local Network - If enabled, guests can access the
local network and manage it.
• Enable Guest Network Bandwidth Control - If enabled, the Guest Network
Bandwidth Control rules will take effect.
• Egress Bandwidth For Guest Network - The upload speed through the WAN
port for the guest network.
• Ingress Bandwidth For Guest Network - The download speed through the WAN
port for the guest network.
• Guest Network - Enable or disable this function.
• Network Name - Enter a value of up to 32 characters. The Network Name (SSID)
must be assigned to all wireless devices in your guest network.
• Wireless Security - You can configure the security of the guest network.
• Access Time - During this peroid the wireless devices can access the guest
network.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control > Control Settings page.