User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR902AC
AC750 Wireless Travel Router
- 92 -
4.14 System Tools
There are nine submenus under the System Tools menu: SNMP, Time Settings, Diagnostic,
Firmware Upgrade, Factory Defaults, Backup and Restore, Reboot, Password, System Log
and Statistics. Click any of them, and you will be able to configure the corresponding function.
The detailed explanations for each submenu are provided below.
4.14.1 Working Mode
Choose menu “System Tools
→
Working Mode”, check Control the system mode by
software and then you can see the following screen.
3G/4G Router - This mode stands for Wireless Router Mode. It functions as a standard
wireless router and you can also plug in a 3G/4G USB modem if you need.