User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR902AC
AC750 Wireless Travel Router
- 122 -
3G/4G Router - This mode stands for Wireless Router Mode. It functions as a standard
wireless router and you can also plug in a 3G/4G USB modem if you need.
Hotspot Router - It functions as a hotspot router.
AP – This mode stands for Access Point Mode, Repeater Mode and Client Mode. When
selected, you have to go to the Quick Setup to specify the mode you need.
Note: If Control the system mode by software is checked, the operation mode switch of the
router will be disabled.
5.7.2 Diagnostic
Choose menu “System Tools
→
Diagnostic”, and then you can transact Ping or Traceroute
function to check connectivity of your network in the following screen.
Diagnostic Tool - Check the radio button to select one diagnostic tool.
• Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to
a given host or gateway.
• Traceroute - This diagnostic tool tests the performance of a connection.
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If
pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not,