User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR902AC
AC750 Wireless Travel Router
- 164 -
7.7 System Tools
Choose menu “System Tools”, and then you can see the submenus under the main menu:
Working Mode, Diagnostic, Firmware Upgrade, Firmware Upgrade, Factory Defaults,
Backup & Restore, Reboot, Password and System Log. Click any of them, and you will be able
to configure the corresponding function. The detailed explanations for each submenu are
provided below.
7.7.1 Working Mode
Choose menu “System Tools
→
Working Mode”, check Control the system mode by
software and then you can see the following screen.
3G/4G Router - This mode stands for Wireless Router Mode. It functions as a standard
wireless router and you can also plug in a 3G/4G USB modem if you need.
Hotspot Router - It functions as a hotspot router.
AP – This mode stands for Access Point Mode, Repeater Mode and Client Mode. When