User's Manual Part 2

112
Chapter 7
Congure the Router in Client Mode
Enable WDS - If your host AP supports WDS well, please enable this option. If WDS is
enabled, all traffic from wired networks will be forwarded in the format of WDS frames
consisting of four address fields. If WDS is disabled, three address frames are used.
Wireless Name of Root AP - Enter the SSID of the AP that you want to access.
MAC Address of Root AP - Enter the MAC address of the AP that you want to access.
Survey - Click this button, and the AP List page will appear. Find the SSID of the Access
Point you want to connect to, and click Connect in the corresponding row. The target
network’s SSID and MAC address will be automatically filled into the corresponding
box.
7. 4. 2. Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless Security.
3. Configure the security settings of your wireless network and click Save.