User's Manual Part 2

142
Chapter 8
Configure the Router in Hotspot Router Mode
• Enable SSID Broadcast - If enabled, the router will broadcast the wireless
network name (SSID).
• Disable Local Wireless Access - If you select this option, the wireless clients will
not be able to connect to the router.
8. 5. 2. Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless Security.
3. Configure the the security settings of your wireless network and click Save.
• Disable Security - The wireless security function can be enabled or disabled. If
disabled, wireless clients can connect to the router without a password. It’s strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-
shared passphrase.
• Version - Select Automatic, WPA-PSK or WPA2-PSK.
• Encryption - Select Automatic, TKIP or AES.