User's Manual

116
2 ) Click
Save.
Note: Log in to the web management page again if the IP address of the router has been altered.
3. Survey the SSID to be bridged:
1 ) Go to
Wireless > Wireless Settings and click Enable WDS Bridging.
2 ) Click Survey, locate the host router’s SSID and click Choose (here we take
TP-Link_2512 for example).
3 ) If the host router is set with a wireless password, you should enter its wireless
password.
4 ) Click
Save.
4. Disable DHCP: Go to DHCP, select Disable, and click Save.
Now you can go to
Status to check the WDS status. When the WDS status is Run, it
means WDS bridging is successfully built.