User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Internet
- Chapter 3. Configuration for Router Mode
- 3.1 Login
- 3.2 Quick Setup
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Status
- 3.4.2 Network
- 3.4.3 Wireless
- 3.4.4 Wireless Statistics
- 3.4.5 Guest Network
- 3.4.6 DHCP
- 3.4.7 Forwarding
- 3.4.8 Security
- 3.4.9 Parental Control
- 3.4.10 Access Control
- 3.4.11 Advanced Routing
- 3.4.12 Bandwidth Control
- 3.4.13 IP & MAC Binding
- 3.4.14 ARP List
- 3.4.15 Dynamic DNS
- 3.4.16 No-IP DDNS
- 3.4.17 IPv6 Support
- 3.4.18 System Tools
- 3.4.19 Diagnostic
- 3.4.20 Firmware Upgrade
- Chapter 4. Range Extender Mode
- Chapter 5. Access Point Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
91
TL-WR941HP
450Mbps High Power Wireless N Router
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.
Site Prefix/ Site Prefix Length: - Configure the Site Prefix and Site Prefix Length. Please
contact your ISP before configuration.
LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.
3) PPPoEv6
Figure 3-80 PPPoEv6
PPPoE Session - The PPP session type for IPv6 connection. There are two types:
Share with PPPoEv4 - The PPPoEv6 and PPPoEv4 use the same PPP session.
Create a new Session - The PPPoEv6 and PPPoEv4 use different PPP sessions. It is
default to select this option.
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
IPv6 Address - Display the IPv6 address in colon-hexadecimal notation provided by your
ISP.
IPv6 Address Prefix - Display the IPv6 Prefix Length in dotted-decimal notation provided
by your ISP.
Default Gateway - Display the default gateway in colon-hexadecimal notation provided by
your ISP.