User's Manual

142
TL-WR941HP
450Mbps High Power Wireless N Router
Figure 5-8 WAP/WPA2 - Enterprise
 Version - you can choose the version of the WPA security on the pull-down list. The default
setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA
version 2) automatically based on the wireless station's capability and request.
 Encryption - You can select either Automatic, or TKIP or AES.

Note:
If you check the WPA/WPA2 radio button and choose TKIP encryption, you will find a
notice in red as shown below.
 Radius Server IP - Enter the IP address of the Radius Server.
 Radius Port - Enter the port that radius service used.
 Radius Password - Enter the password for the Radius Server.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Click the Save button to save your settings on this page