User's Manual

40
TL-WR941HP
450Mbps High Power Wireless N Router

Note:
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you
will find a notice in red as shown below.
 Wireless Password - You can enter ASCII characters between 8 and 63 characters
or 8 to 64 Hexadecimal characters. The default password is the same with the default
PIN code, which is labeled on the router or can be found in Figure 3-20.
 Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
 WPA/WPA2- Enterprise - It’s based on Radius Server. If you choose WPA/WPA2 -
Enterprise, WPS function will be disabled.
Figure 3-24 WPA/WPA2 - Enterprise
 Version - you can choose the version of the WPA security on the drop-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or