71035787 TP-LINK TECHNOLOGIES CO.,LTD. E-mailǖSupport@tp-link.com Websiteǖhttp:// www.tp-link.com.cn ADDǖFI.3,Bldg.R1-B.High-Tech Industrial Park,Shenzhen Road.Shenzhen.
User’s Guide TL-SG1008 8-port Gigabit Ethernet Switch TL-SG1016 16-port Gigabit Ethernet Switch TL-SG1024 24-port Gigabit Ethernet Switch TL-SG1048 48-port Gigabit Ethernet Switch
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2007 TP-LINK TECHNOLOGIES CO., LTD.
radio interference, in which case the user may be required to take adequate measures. SAFETY NOTICES Cautions Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
CONTENTS Package Contents .................................................................. 1 Chapter 1 Introduction of the Product.............................. 2 1.1 Overview of the Product...............................................................2 1.2 Features..........................................................................................2 Chapter 2 Installation......................................................... 4 2.1 Mounting the Switch on a Desk...........................
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Package Contents The following contents should be found in your box: ¾ ¾ ¾ ¾ ¾ One Gigabit Ethernet Switch One power cord This User's Guide Rubber footpads for Desk-mount Rack-mount kit for installing the switch in a 19-inch rack Note: If any of the above contents is damaged or missing, please contact the retailer from whom you purchased the Gigabit Ethernet Switch for assistance.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Chapter 1 Introduction of the Product This chapter describes the features of the Gigabit Ethernet Switch. 1.1 Overview of the Product The Gigabit Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and backbone connections make Gigabit a reality.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide ¾ 8/16/24/48 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto- MDI/MDIX ¾ All ports Support full/half-duplex mode for 10/100Mbps and full duplex- mode for 1000Mbps ¾ Supports IEEE802.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Chapter 2 2.1 Installation Mounting the Switch on a Desk Before placing the Switch on a desk, attach four rubber footpads to the flutes on the Switch bottom, then lay the Switch on the desktop, where can be able to withstand 5kg of weight. TL-SG1008, TL-SG1016, TL-SG1024 and TL-SG1048 are different in the number of LED indicators and RJ45 ports. All figures are of TL-SG1008 in this user's guide.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Figure 2-1 Rivet the “L” brackets onto the Switch Figure 2-2 Fasten the Switch in the rack 2.3 Power On The Gigabit Ethernet Switch is powered by AC power supply.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide TL-SG1016/TL-SG1024 /TL-SG1048 will flash momentarily for one second, which represent a resetting of the system. 2) The Power indicator will light up all the time. If the LED indicators don’t respond as described above, please check the power supply and connection.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Chapter 3 Identifying External Components This Chapter describes the front panel, rear panel and LED indicators of the Switch. TL-SG1008, TL-SG1016, TL-SG1024 and TL-SG1048 are different in the number of LED indicators and RJ45 ports. Figure 3-1 TL-SG1008 Switch Front Panel sketch 3.1 Rear Panel The rear panel of the TL-SG1008 only features a power receptacle, which is an AC power receptacle.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Figure 3-3 TL-SG1008 Switch LEDs sketch Power LED: This indicator will light solid red when the Switch powers up. If the LED is not lit, please check the power supply and connection. 1000Mbps Link/Act LED: This indicator will light solid green when the corresponding port is connected to a 1000Mbps device and will flash green when data is being transmitted or received on the working connection.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Appendix A: Specifications General IEEE802.3 10Base-T Standards IEEE802.3u 100Base-TX IEEE802.
TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Appendix B: Troubleshooting 1. The Power LED is not lit ¾ Make sure the AC power cord connected the Switch with power source properly. ¾ Make sure the power source is ON. 2. The Link/Act LED is not lit when a device is connected to the corresponding port ¾ Make sure that the cable connectors are firmly plugged into the Switch and the device. ¾ Make sure the connected device is turned on and working well.