Installation Guide

Connection
© 2020 TP-Link 7106508699 REV1.0.0
Installation Guide
6-Port 10/100Mbps Desktop Switch with 4-Port PoE+
LED Explanation
Power
On:
Power on
O: Power o
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SF1006P can supply up to 30 W for each PoE port and 67 W for all PoE ports.
Power
PoE MAX
PoE Max
On
: 60 W≤Total power supply < 67 W
Flashing: Total power supply ≥ 67 W
O: Total power supply < 60 W
DC Power Adapter
AC Power Cord
Router
LAN Port
WAN Port
Internet
Ethernet Ports (1-6)
PoE Ports (1-4)
IP Camera IP Phone
PoE Devices
AP
Link/Act and PoE Status
On: Link present but no activity
Flashing: Transmitting/receiving data
O: No link
On: Providing PoE power
Flashing: Current-overload/Short-circuit
O: Not providing PoE power
O: Port 1–4 run at 10/100 Mbps and support PoE power supply up to 100 m
away.
On: Port 1–4 run at 10 Mbps and support PoE power supply up to 250 m away.
Extend (Port 1–4)
O: All the ports transmit data in the same priority.
On: Port 1 and 2 transmit data in a higher priority than other ports. When
congestion occurs, packets which are transmitted by the ports with higher
priority occupy the whole bandwidth.
Priority (Port 1–2)
Switch Explanation
Network Video Recorder