User's Guide

2 ) Click Save.

Note: Log in to the web management page again if the IP address of the router is altered.

3. Survey the SSID to be bridged:

1 ) Go to

Advanced > System Tools > System Parameters and focus on the 2.4GHz

WDS

section, click Enable WDS Bridging.

2 ) Click

Survey, locate the root router’s SSID and click Choose (Here we take

TP-Link_4F98 as example).

3 ) If the root router has wireless password, you should enter the wireless password

of the root router.

4 ) Click

Save.

4. Disable DHCP:

1 ) Go to

Network > DHCP Server.

2 ) Deselect

Enable DHCP Server and click Save.

Now you can go to

Advanced > Status > Wireless to check the WDS status. When the

WDS status is Run, it means WDS bridging is successfully built.

Q5. What should I do if I cannot access the internet even though the

configuration is finished?

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > Status to check internet status: