Operation Manual

1
About This Guide
This guide provides details of each function and shows how to configure the AP device
appropriate to your needs. In addition to this guide, a Quick Installation Guide is also
released with each TP-LINK AP device, you are suggested to configure your AP device
for quick Internet setup by following the published Quick Installation Guide before you
get started with a further configuration.
Conventions
In this guide the following conventions are used:
Convention Description
AP device Stands for 11AC Wireless Gigabit Access Point without any explanation.
parameters
Parameters provided in the screenshots are just references for setting up the device,
which may differ from the actual situation. You can set the parameters according to
your demand.
screenshots
The demonstrated screenshots may look a little different from the actual web page of
your device due to the various firmware versions. Please just configure your product
based on the actual web page.
Blue Italic Hyperlinks are in blue italic. You can click to redirect to a website or a specific section.
Blue
Contents to be emphasized and texts on the web page are in blue, including the
menus, items, buttons, etc.
>
The menu structures to show the path to load the corresponding page. For example,
Advanced > Wireless > WPS means the WPS function page is under the Wireless menu
that is located in the Advanced tab.
Note:
Ignoring this type of note might result in a malfunction or damage to the device.
Tips:
Indicates important information that helps you make better use of your device.
symbols on the web
page
•
click to edit the corresponding entry.
•
click to delete the corresponding entry.
•
click to enable or disable the corresponding entry.