Installation Guide

Connect the power adapter

to the router and turn on

the router.

AC2300 Wireless MU-MIMO Gigabit Router

Connect the Hardware

Verify that the following LEDs are on

and solid to confirm the hardware is

connected correctly.

Note: If the 2.4GHz LED and 5GHz LED are off,

press and hold the Wi-Fi On/Off button on the

side panel for about 2 seconds. Both the LEDs

should turn solid on in a few seconds.

Power

Internet

2.4GHz

5GHz

If your internet connection is through an Ethernet cable directly from the

wall instead of through a DSL/Cable/Satellite modem, connect the

Ethernet cable to the router’s Internet port, and then follow Step1, 5 and 6

to complete the hardware connection.

Quick Installation Guide

Modem

Power adapter

Router

Turn off the modem,

and remove the backup

battery if it has one.

Install the antennas.

Connect the modem to the

router’s Internet port with an

Ethernet cable.

Turn on the modem, and

then wait about 2 minutes

for it to restart.

Internet

PAGE 1
Quick Installation Guide AC2300 Wireless MU-MIMO Gigabit Router 1 Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable to the router’s Internet port, and then follow Step1, 5 and 6 to complete the hardware connection. Internet Install the antennas. 5 Power adapter Router 2 Connect the power adapter to the router and turn on the router.
PAGE 2
Configure the Cloud Router b Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network. Computer Method ONE: Via TP-Link Tether App 1. Download the Tether app. Smart Device or TP-Link_XXXX Scan for Tether Tether 2. Connect your smartphone to the router. SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router.