User Manual

Chapter 16

Manage the Router

4. Keep the HTTPS Port and HTTP Port as the default settings.

5. Decide which remote device can access the router remotely. Select All Devices to

allow all remote devices to access the router, or select Specified Device and enter an

IP address to allow only the remote device using the specified IP address.

6. Click Save.

Now the specified remote device(s) can access the router from the internet via the

displayed Web Address for Management.

Note:

If a warning pops up when you visit the above address remotely, click Trust (or a similar option) to continue.

16. 11. System Log

When the router does not work normally, you can save the system log and send it to the

technical support for troubleshooting.

• To save the system log in local:

1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the

router.

2. Go to Advanced > System Tools > System Log.

3. Choose the type and level of the system logs as needed.

4. Click Save Log to save the system logs to local.