User Manual

Chapter 4

Set Up Internet Connection

5. Configure LAN ports. Windows users are recommended to choose from the first two

types. Fill in Address Prefix provided by your ISP, and click Save.

Tips:

Find Help on the management interface to know more about items.

6. Click Status to check whether you have successfully set up an IPv6 connection. The

following figure is an example of a successful PPPoE configuration.

Tips:

Visit the FAQ section if there is no internet connection.

4. 4. Configure the Router in Access Point Mode

In this mode, your router connects to a wired or wireless router via an Ethernet cable

and extends the wireless coverage of your existing network. Advanced functions like

NAT, Parental Controls and QoS are not supported in this mode.

Existing Router

Ethernet4Ethernet3Ethernet1Ethernet2Internet

Ethernet4

Ethernet

New Router

Internet

Clients

1. Connect the router’s Internet port to the existing router’s Ethernet port via an

Ethernet cable.