Installation Manual

ManualsBrandsTP-Link ManualsComputers & TabletsTP-Link - Wireless-AX3000 4-Stream Dual-Band Wi-Fi 6 Router - Black

Connect the Hardware

Set Up the Network

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

Scan for Tether

Tether

Choose your device type

Archer AX11000

Archer C5400X

Range Extender

Router

Archer AX6000

Method TWO: Via a Web Browser

The default wireless network names (SSIDs) and password

are printed on the label at the bottom of the router.

1. Connect your device to the router wirelessly

or with an Ethernet cable.

2. Launch a web browser, and enter

http://tplinkwifi.net or http://192.168.0.1 in

the address bar. Create a password to log in.

3. Follow the step-by-step instructions to

set up the internet connection and

Note: If the login window does not appear, please refer to

Q1 of Need Help? in this guide.

2. Open the Tether app and log in with your

TP-Link ID.

3. Tap the button in the Tether app and

select Router > Wireless Router. Follow

the steps to complete the setup and

connect to the internet.

Note: If you don’t have an account, create one first.

http://tplinkwi.net

Let’s Get Started

Conrm Password

Password

Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more

than 2 seconds. Both the LEDs should turn solid on.

Power

Internet

2.4GHz

5GHz

If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /

Cable / Satellite modem, connect the Ethernet cable to the router’s WAN port, and then follow steps 3

and 4 to complete the hardware connection.

*Image may dier from actual product.

Unplug the power to turn o your modem, if any, and remove

the backup battery if it has one.

Place the router horizontally and orient the antennas vertically.

Modem

Unplug the power

Power on the modem, and then wait

about 2 minutes for it to restart.

Connect the power adapter to

the router and turn on the router.

Verify that the hardware connection is correct by checking the following LEDs.

Set up with videos:

Scan QR code or visit

https://www.tp-link.com/support/setup-video/#wi--routers

Model: Archer AX3000

AX3000 Gigabit Wi-Fi Router

Wireless Password/PIN:XXXXXXXX

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

Internet

Connect the powered-off

modem to the router’s WAN

port with an Ethernet cable.

Summary of content (2 pages)

PAGE 1
2 Set Up the Network Set up with videos: Scan QR code or visit https://www.tp-link.com/support/setup-video/#wi-fi-routers 1 Connect the Hardware Unplug the power to turn off your modem, if any, and remove the backup battery if it has one. Unplug the power Place the router horizontally and orient the antennas vertically.
PAGE 2
Button Explanation WPS/Wi-Fi Button Press the button for 1 second, and immediately press the WPS button on your client to start the WPS process. Press and hold the button for more than 2 seconds to turn on or off the wireless function of your router. Reset Button Press and hold the button until all LEDs turn on to reset the router to its factory default settings. LED Button Press the button for 1 second to turn on or off the LEDs of your router.