User Guide
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log In to Your Router
- Set Up Internet Connection
- TP-Link Cloud Service
- Wireless Settings
- Guest Network
- USB Settings
- HomeShield
- OneMesh with Seamless Roaming
- Network Security
- NAT Forwarding
- VPN Server
- Customize Your Network Settings
- Manage the Router
- 15. 1. Upgrade the Firmware
- 15. 2. Backup and Restore Configuration Settings
- 15. 3. Change the Login Password
- 15. 4. Password Recovery
- 15. 5. Local Management
- 15. 6. Remote Management
- 15. 7. System Log
- 15. 8. Test the Network Connectivity
- 15. 9. Set Up System Time
- 15. 10. Set the Router to Reboot Regularly
- 15. 11. Control the LED
- FAQ
19
Chapter 4
Set Up Internet Connection
2. Go to Advanced > IPv6.
3. Enable IPv6 and select the internet connection type provided by your ISP.
Tips:
If you do not know what your internet connection type is, contact your ISP or judge according to the already known
information provided by your ISP.
4. Fill in information as required by different connection types.
1 ) Static IP: Fill in blanks and click Save.
2 ) Dynamic IP(SLAAC/DHCPv6): Click Advanced to input further information if
your ISP requires. Click Save and then click Renew.
3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6
server. Click Advanced to input further information if your ISP requires. Click
Save and then click Connect.