User Guide
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect the Hardware
- Log In to Your Router
- Set Up Internet Connection
- TP-Link Cloud Service
- Wireless Settings
- Guest Network
- USB Settings
- HomeShield
- OneMesh with Seamless Roaming
- Network Security
- NAT Forwarding
- VPN Server
- Customize Your Network Settings
- Manage the Router
- 15. 1. Upgrade the Firmware
- 15. 2. Backup and Restore Configuration Settings
- 15. 3. Change the Login Password
- 15. 4. Password Recovery
- 15. 5. Local Management
- 15. 6. Remote Management
- 15. 7. System Log
- 15. 8. Test the Network Connectivity
- 15. 9. Set Up System Time
- 15. 10. Set the Router to Reboot Regularly
- 15. 11. Control the LED
- FAQ
72
Chapter 13
VPN Server
3 ) Click ADD.
Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the Windows built-in PPTP software
as an example.
1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center.
2. Select Set up a new connection or network.
3. Select Connect to a workplace and click Next.