Quick Installation Guide

ManualsBrandsTP-Link ManualsWireless RoutersTP-Link Archer C5 V1.20

On/Flashing

Quick

Installation Guide

Wired

Connect wirelessly by using

the default network name

(SSID) and password on the

product label printed on the

bottom of the router.

Open a web browser on the computer and configure the router according to the following main clues.

Enter http://tplinklogin.net in the address bar. Type in admin for both the user name and password

and click OK.

Note: If the login window does not appear, please refer to FAQ->Q1.

Choose the frequency you prefer and then click Next. Click Next to continue. Click Finish to complete the setup.

Via Web BrowserMethod 1

AC1200 Wireless

Dual Band Gigabit Router

2. Configuring the Router

Wireless On/Off USB1 USB LED

USB2

Internet

1 2 Ethernet

4 WPS/Reset

Power off the modem,

and remove the backup

battery if any.

Connect the modem to the

Internet port on your router using

an Ethernet cable.

Power on the modem,

wait for 2 minutes and

then power on the router.

Check the following LED

lights to ensure the hardware

connection is correct.

21 3 4

Modem

Power

System

Flashing

2.4G

Flashing

Power Off

Power On

LAN

Typical Connection

Ethernet cable

Power On

Enjoy!

Now your wired and

wireless devices can

connect to the Internet !

Auto-Detect

Dynamic IP (Most Common Cases)

Static IP

PPPoE/Russian PPPoE

L2TP/Russian L2TP

PPTP/Russian PPTP

Back

Quick Setup-WAN Connection Type

OK Cancel

admin

Back

Finish

Congratulations!

Quick Setup-Finish

Back

http://tplinklogin.net

Quick Setup-Wireless Dual Band Selection

Wireless Network Name:

PSK Password:

TP-LINK_XXGHZ_XXXXXX

XXXXXXXX

2.4GHz & 5GHz Wireless Network Name and Password

Back

Region:

Warning:

Wireless Security:

Internet

1. Connecting the Hardware

INTERNET

Only work in 2.4GHz (802.11b/g/n)

Only work in 5GHz (802.11a/n/ac)

Concurrently with 2.4GHz and 5GHz (802.11a/b/g/n/ac)

INTERNET

Note: If the 2.4G and 5G LEDs are not flashing, please verify

that the wireless switch on the rear panel of the router is on.

Wireless

You may rename your 2.4GHz/5GHz wireless network name and

create your own password. Once done, the wireless connection will

disconnect automatically, and you must then sign in with the new

names/passwords to regain access to the Internet.

Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect the Ethernet cable directly to the router’s Internet port.

INTERNET INTERNET

7106504780 REV2.0.0

Select your Connection Type and if you are unsure what your

connection type is, select Auto-Detect. Click Next and follow

the instruction to continue.

Note: If an Internet connection is already established, the Quick Setup

wizard will bypass Step and go to Step .

Connect your computer to the router (Wired or Wireless).

Summary of content (2 pages)

PAGE 1
INTERNET Quick Installation Guide Modem 7106504780 REV2.0.0 AC1200 Wireless Dual Band Gigabit Router Typical Connection 1. Connecting the Hardware 1 2 Power off the modem, and remove the backup battery if any. 3 Connect the modem to the Internet port on your router using an Ethernet cable. 4 Power on the modem, wait for 2 minutes and then power on the router. Check the following LED lights to ensure the hardware connection is correct.
PAGE 2
Method 2 Via CD Setup Wizard Note: If you are using a computer that cannot run the mini CD, please refer to Method 1 for configuration. 1 Insert the TP-LINK Resource CD into the CD-ROM drive. 2 Select Archer C5 and then click Easy Setup Assistant. Note: If the main page does not display on your computer, browse the files on the CD and double click Autorun.exe. 3 Choose your language, click START and the Easy Setup Assistant will guide you through the setup process.