User Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C5
AC1200 Wireless Dual Band Gigabit Router
4.3 Wireless
Choosing menu “Basic
→
Wireless”, you can configure the basic settings for the wireless network
including 2.4GHz and 5GHz.
Figure 4-8 Wireless Setting
Wireless 2.4GHz/5GHz - Select ON to enable your wireless 2.4GHz/5GHz network, and
select OFF to disable your wireless 2.4GHz/5GHz network.
Network Name (SSID) - Create a name (up to 32 characters) for your wireless 2.4GHz/5GHz
network. If the Hide SSID checkbox is selected, the SSID of your wireless network will be
hidden from the Wi-Fi network.
Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.
4.4 USB Settings
4.4.1 File Sharing
Choose menu “Basic
→
USB Settings
→
File Sharing”, you can configure the sharing settings.
- 21 -