User Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C5
AC1200 Wireless Dual Band Gigabit Router
ii. Enter ftp://192.168.0.1:21 in the dialog box and click the OK button.
3) FTP (Remote): This method is disabled by default. If you select this check box, remote
users can access the USB device through FTP over the Internet. This feature supports
both downloading and uploading of files. To change the FPT (Remote) port, modify the
port and then click the Save button. To access the USB device for example from a
Windows computer:
i. Select Start > Run.
ii. Enter ftp://WAN IP:port
in the dialog box and click the OK button.
Note:
If the port for FTP (Remote) is changed, the port for FTP will be changed to the same
port.
Sharing Mode
1) If Share All is selected, all the folders in the USB device will be shared. Besides
Authentication will appear for you to choose or not.
2) If Share Selected Folders is selected, only the folders you specified will be shared. You
have to click the Create Share Folder appeared to specify folders allowed to be shared
in the next screen.
Figure 4-10 Add or Modify Share Folder
- 23 -