User Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C5
AC1200 Wireless Dual Band Gigabit Router
Figure 4-12 Guest Network
Allow Guests To See Each Other - If ON is selected, anyone who connects to the guest
network can access each other.
Allow Guests To Access My Local Network - If ON is selected, anyone who connects to
the guest network has access to your local network, not just Internet access.
Wireless 2.4GHz/5GHz - Select ON to enable guest wireless 2.4GHz/5GHz network, and
select OFF to disable guest wireless 2.4GHz/5GHz network.
Network Name(SSID) - create a value of up to 32 characters. The same Name(SSID) must
be assigned to all wireless devices in your guest network.
Password - Create a password for the guest network. The password must have a minimum
of 8 characters in length.
- 25 -