User Guide

Archer C5
AC1200 Wireless Dual Band Gigabit Router
 SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.
You can also use the Survey function to select the SSID to join.
 MAC Address (to be bridged) - The MAC address (BSSID) of the AP your router is
going to connect to as a client. You can also use the Survey function to select the MAC
address (BSSID) to join.
 Survey - Click this button, you can search the APs that run in all channels.
 Key type - This option should be chosen according to the AP's security configuration.
 WEP Index - This option should be chosen if the key type is WEP. It indicates the index
of the WEP key.
 Auth Type - This option should be chosen if the key type is WEP. It indicates the
authorization type of the Root AP.
 Password - If the AP your router is going to connect needs password, you need to fill
the password in this blank.
5.4.2 WPS
Choose menu “Advanced
→
Wireless 2.4GHz
→
WPS”, you can see the screen as shown in
Figure 5-15. This section will guide you to add a new wireless device to an existing network
quickly by WPS (Wi-Fi Protected Setup) function.
Figure 5-15 WPS
 WPS Status - Enable or disable the WPS function here.
 Current PIN - Displays the current value of the router's PIN. The default PIN of the router
can be found in the label or User Guide.
 Restore PIN - Restore the PIN of the router to its default value.
 Gen New PIN - Click this button, and then you can get a new random value for the router's
PIN. You can ensure the network security by generating a new PIN.
 Add device - You can add a new device to the existing network manually by clicking this
button.
- 39 -