User Guide

Archer C5
AC1200 Wireless Dual Band Gigabit Router
 Access And Bandwidth Control
 Allow Guests to See Each Other - If this checkbox is selected, anyone who connects to
the guest network can communicate with each other.
 Allow Guests To Access My Local Network - If this checkbox is selected, anyone who
connects to the guest network has access to your local network, not just Internet access.
 Enable Guest Network Bandwidth Control - If this checkbox is selected, the Guest
Network Bandwidth Control rules will take effect.
1) Egress Bandwidth For Guest Network - Specify the upload speed through the
WAN port for Guest Network.
2) Ingress Bandwidth For Guest Network - Specify the download speed through the
WAN port for Guest Network.
 Wireless 2.4GHz
 Enable Guest Network (2.4G) - Select this checkbox to enable 2.4GHz guest network.
 Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Guest Number - Limit the number of the guest.
 Wireless Security - You can configure the security of Guest Network here.
 Access Time - During this time the wireless stations could access the AP.
 Wireless 5GHz
 Enable Guest Network (5G) - Select this checkbox to enable 5GHz guest network.
 Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Guest Number - Limit the number of the guest.
 Wireless Security - You can configure the security of Guest Network here.
 Access Time - During this time the wireless stations could accessing the AP.

Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
- 60 -