User Manual

Chapter 13

Manage the Router

4. Disable DHCP:

1 ) Go to Network > DHCP Server.

2 ) Deselect Enable DHCP Server and click Save.

Now you can go to Advanced > Status > Wireless to check the WDS status. When the

WDS status is Run, it means WDS bridging is successfully built.

13. 13. 3. WPS

Enable this function to easily set up and connect your WPS-enabled devices to your

Wi-Fi at a push of the WPS button.

13. 13. 4. NAT

Select the checkbox to Enable/Disable the NAT (Network Address Translation) and

NAT Boost function. The router’s NAT feature makes devices on the LAN use the same

public IP address to communicate with devices on the internet, which protects the local

network by hiding IP addresses of the devices.