Specifications

Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

Setup process.

Step 3: When the WPS LED is on, the client device has successfully connected to the modem

router.

Step 4: Refer back to your client device or its documentation for further instructions.



Note:

1) The WPS LED on the modem router will light green for five minutes if the device has been

successfully added to the network.

2) The WPS function cannot be configured if the Wireless Function of the modem router is

disabled. Please make sure the Wireless Function is enabled before configuring the WPS.

4.8.3 Wireless Security

Choose menu “Wireless 2.4GHz”” Wireless Security”, you can configure the security settings

of your wireless network.

There are three wireless security modes supported by the modem router: WPA/WPA2 – Personal,

WPA/WPA2 – Enterprise, WEP (Wired Equivalent Privacy).

Figure 4-35

 Disable Wireless Security: If you do not want to use wireless security, check this radio

button. But it’s strongly recommended to choose one of the below modes to ensure security.

 WPA/WPA2-Personal: It’s the WPA/WPA2 authentication type based on pre-shared

passphrase. It is chosen by default.

 Authentication Type: You can choose the type for the WPA/WPA2-Personal security on

the drop-down list. The default setting is Auto, which can select WPA-PSK

or WPA2-PSK

as authentication type automatically based on the wireless station's capability and request.