Specifications

Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
78
Figure 4-68
Click the Add Interface button, you can add WAN Interfaces.
Click the Save button to save your settings.
4.13.2 IPv6 Static Route
Choose “IPv6 Route Settings” “IPv6 Static Route”. You can see the IPv6 Static Route screen.
This screen allows you to configure the IPv6 static routes (shown in Figure 4-69). An IPv6 static
route is a pr
e-determined path that network information must travel to reach a specific host or
network.
Figure 4-69
To add a new entry, follow the instructions below.
1. Click the Add New button in Figure 4-69, and you will see the screen as shown in Figure
4-70.
Figure 4-70
2. Enter the following data:
 Destination IPv6 Address: The IPv6 address of the network or host that you want to assign
to a static route.